EMART Softbox Lighting Kit, 16"X16" Soft Box, 3000K-6000K 85W LED Bulbs with Remote, 2 Pack 105W Spiral CFL 5500k Daylight Studio Lights, Portrait, Video Recording
One of the photography backdrop stands, lighting kits and support systems EMART makes.
4.4
$6203
In Stock
Other options on this listing
Our Softbox Lighting Kit, 16"X16" Soft Box, 3000K-6000K 85W LED Bulbs with Remote, 2 Pack 105W Spiral CFL 5500k Daylight Studio Lights, Portrait, Video Recording is the piece we hand over when a room has to turn into a set in one go.
You also get a handheld remote and a carry bag. Specifications here are read straight off our own listing — no rounding, no best case.
Key features
- Newly Designed Non-Slip Light Stand. 1. Industry-leading reverse folding design, effectively reduce space occupation. 2. The light stand is detachable, and you can manually control the light stand pole to adjust the direction and height of the softbox. 3. The height of the light stand can be adjusted from 18 to 65 inches, and the node is fixed with a plate buckle to make it easier to use 4. The bottom rubber sleeve design makes the tripod more stable and non-slip
- 16"x 16"Soft box. 16"x 16" soft box silver reflective inner lining,the removable front diffusion spreads light into a homogenous soft light.The soft box is equipped with a 3-meter power cord to increase the range of movement of the softbox light kit. And give away 3 wire buckles, which is convenient for fixing and organizing the power cord.
- 2 Pack 105W CFL Daylight. Power:105W/500W (output equivalent), Style:Spiral, Color temperature: 5500K, Voltage: 110V-130V, Lifetime: more than 8000h, Lumen: 5800, CRI: 80~85, Length:9 inch, Diameter:3 inch, Socket: E26/E27.
- Bright White Light. The photo bulb gives off a nice bright white light, provides soft no shadow results. This light blends well with indirect sunlight to create 5500k daylight. The photography bulb provides enough light to create the effects you need when shooting video and photos.
Specification
In the box
【Rich Package Contents】1 x 16"x 16"Soft box(Head 210° adjustable); 1 x 3000K-6000K 85W LED Bulb (with Remote Control); 1 x Gloves;1 x (18"to 65"/45cm-165cm) Height Adjustable Softbox Light Stand(with Nut for light stand bottom); 3 x Velcro Cable Ties ; 1 x Carry Bag. If you have any questions about our softbox lighting kit, please contact us, we will reply you within 24 hours
Where it sits in the range
EMART softbox heads, continuous LED lamps and full two- and four-light kits with stands, grids and carry bags — the light that goes up next to a photography backdrop.
What this one is for
A softbox turns a small bright lamp into a large dull one, and large dull light is what makes a face read as a face. A kit like this covers portraits, product photography and interviews; put a third head on the background and the subject stops being stuck to the backdrop behind them.
What size EMART backdrop stand this suits
Size is a room problem before it is a shopping problem. Take the wall you shoot against, measure across it and subtract a foot at each end for the legs — the rest is what the frame can accommodate once it is open. Then decide height, because that is the figure people change their mind about the moment the subject stands up: seven feet suits seated work, full-length needs the sections fully expanded so the top edge of a white, black, green or seamless muslin surface never appears. Leave space between the subject and the surface too; stood directly against it, a face picks up every mark behind it. A small room rewards a little extra span, which is where an additional panel or a prop goes. In general, choosing one size up is the cheaper mistake.
Putting it up
Assembly is quick and standard. Pull each telescopic section up by hand, lock the adjustable collar, square the base. The mounting threads are the usual size for this kind of gear, so a fitting borrowed from another stand will do, and the whole setup takes one pair of hands. Stability is a question of footprint. Open the legs to their stops, press the feet down, and position the base so the heaviest part of the load sits over it — weight in the right place does more for a support system than weight in total.
Clamps, hooks and the top edge
The crossbar carries the hang, the hooks spread it and a spring clamp secures the corners. Keep two spare clamps in the kit: one ends up on a light, one on a tripod tube, and neither is worth needing and not having.
Carrying it and keeping it
The bag in the package is the one it will spend its life in: collapsible frame, small parts, extra clamps. Folded it is portable enough for a train and compact enough for a boot. Durability lives in the fittings. Aluminum alloy gives an enhanced strength for the weight, the material of the locking collars decides the rest, and the practicality of a professional design beats a powerful specification nobody uses. Quality here means the metal has not moved in a year. Keep it dry and the care budget is a cloth. Grit in a joint wears a section faster than rain does; a rolled surface arrives without a wrinkle, a folded one arrives with a map of itself.
