EMART Triple Suction Cup Car Mount for Gopro/Insta 360/DJI/AKASO
EMART gear: photography backdrop stands, background support, lighting and the small metal.
Camera Mount with Selfie Stick Extension Pole 1/4" Screw, Compatible with Insta360 X5 X4 X3 GoPro DJI OSMO 360 Cameras
4.4 67 reviews
$6999
In Stock
This is our answer for the setup that has to go up, hold still and come down the same evening.
The build runs to metal, which keeps the weight sensible without giving up on the joints. It arrives with a quick-release plate and 360-degree rotation. Specifications here are read straight off our own listing — no rounding, no best case.
Key features
- Suitable for a Variety of Surfaces. Equipped with reinforced rails and dual suction cups, it supports short-distance sliding adjustment and 360° rotation of the suction cups to adapt to different surfaces. This car vlog camera mount offers excellent shooting flexibility
- Adjustable shooting angle. Magic arm and self-timer pole (14.4-44.3”) can be fine-tuned without disassembly.Thickened piping for added stability. At max speed of 80km/h, the selfie stick has a max load capacity of 11 lbs when retracted(fully extended:2.2 lbs)
- 【Safe&Flexible Triple Suction Cup Car Bracket】 3” metal hand pump suction cup creates a super secure triangular base. The accessory assembly connection is designed with ARRI positioning and also features a safety cord to provide security.Product could be positioned for specific use cases like travel vlogging,automotive safety,or home content creation
Specification
| Material | Metal |
|---|---|
| Reviews on the listing | 67 |
In the box
【Upgraded Safety】 This 3 inch/76 mm quick release suction cup comes with a vacuum warning line that allows you to check if the suction cup is secure. The metal pump design gives the suction cup more suction power and stability, and it holds 33.1lb/15kg vertically for safer use
【Superior Compatibility 】 All accessories all have a 1/4" screw, comes with a 1/4" screw and Action Camera Adapter for mounting mirrorless cameras, cell phone mounts and more. The accessories are compatible with DJI OSMO Pocket 3 Action 5 Pro 4 3 2 /Go Pro13 Hero13 Hero 12 11 10 9 8 7/Insta360X5 X4 X3 X2/AKASO Brave 8 7 4 and more
Where it sits in the range
EMART overhead camera rigs, magic arms, super clamps, suction mounts, ball heads, sandbags and the small metal that holds a photography backdrop stand together.
The job it does
Grip is everything between the camera and whatever it is attached to. Clamps hold backdrop fabric to a crossbar, arms hang a small light off a shelf, plates let a body come off a tripod without unscrewing anything. None of it is interesting and all of it is why a set stays where you left it.
Sizing it against your photography backdrop stand
Size is a room problem before it is a shopping problem. Take the wall you shoot against, measure across it and subtract a foot at each end for the legs — the rest is what the frame can accommodate once it is open. Then decide height, because that is the figure people change their mind about the moment the subject stands up: seven feet suits seated work, full-length needs the sections fully expanded so the top edge of a white, black, green or seamless muslin surface never appears. Leave space between the subject and the surface too; stood directly against it, a face picks up every mark behind it. A small room rewards a little extra span, which is where an additional panel or a prop goes. In general, choosing one size up is the cheaper mistake.
Getting it standing
Setup, in order: extend each telescopic section, lock the adjustable collar, then square the base. The mounting fitting is standard, so heads and clamps from other stands assemble onto it without an adaptor, and it all happens quickly with two hands. The legs open wide, and that width is the stability — not the thickness of the tube. Position the base so nobody kicks a foot, and add weight at the feet whenever the load is heavy or people are moving across the room behind the frame.
Clamping, hooks and the crossbar
A spring clamp at each corner secures the top edge and hooks spread the load along the crossbar, so the surface hangs straight instead of scalloping between two points. The same clamp keeps a light cable or a tripod leg out of frame when the kit gets crowded, without needing a second pair of hands.
Travel, bag and care
Folded, it is compact enough to transport as one piece: the carry bag in the package takes the whole collapsible set, so no extra sections travel loose. Aluminium alloy keeps the weight sensible; the metal that decides durability sits in the locks and the joints, not the finish. The design is pro in the only sense that matters — practicality over appearance — and the material trade is plain: aluminum travels, steel survives. Care takes a minute: sections wiped, clamps back in the bag, the whole thing kept upright in a corner. A wrinkle in a surface is a storage problem rather than a fabric problem.
