EMART Motorcycle Mount Kit for Insta 360 X4 X5, Bike Handlebar Clamp Mounts
EMART gear: photography backdrop stands, background support, lighting and the small metal.
Motorcycle Camera Mount with 55.7" Invisible Selfie Stick for Insta 360 X5 X4 X3 X2 X ONE/DJI OSMO/360 Camera/GoPro
3.6 31 reviews
$3399
In Stock
We keep our Motorcycle Mount Kit for Insta 360 X4 X5, Bike Handlebar Clamp Mounts in the range because most shoots need one dependable frame, not five clever ones.
We build it in aluminium alloy and metal because gear that lives in a car boot gets handled badly. You also get telescopic sections, a portable format and 360-degree rotation. Specifications here are read straight off our own listing — no rounding, no best case.
Key features
- Adjustable Height & Angle. Achieve invisible panoramic shots with the 4-section selfie stick, extending from 17.1" to 55.7" (43.5-141.5cm) with individual rotation locks. Two 360° rotatable ball heads and secure screw knobs allow precise positioning, while non-slip rubber pads on all clamps and arms ensure maximum stability and vibration-free footage.
- Heavy-Duty Metal Build Use. Crafted from robust black anodized aluminum alloy, this kit supports up to 2.2 lb (1 kg). The tool-free super clamps provide an enhanced, hand-tightened grip, while the magic arms and foam handle ensure scratch-free operation, prevent slippage, and dampen vibrations for a perfectly stable third-person motorcycle camera angle.
- Versatile Multi-Scenario Use. Beyond motorcycles and bicycles, this kit is your go-to mount for ATVs, UTVs, scooters, and more. The new seat rail clamp unlocks unique low-angle shots. Everything stores compactly, making it the ultimate portable filming solution for all your adventures.
Specification
| Material | Aluminium alloy and metal |
|---|---|
| Reviews on the listing | 31 |
In the box
【 Motorcycle & Bicycle Mounting Kit】The motorcycle mount kit includes a telescopic invisible selfie stick, two dual-ball-head magic arms, super clamps, and a dedicated bike seat rail clamp for bicycle rear seat expanded mounting options. Using the 1/4" top screw on the invisible selfie stick, this motorcycle camera mount is compatible with Insta 360 X4 X5 X3 panoramic cameras
【Wide Compatibility】The X4 Motorcycle Double Clamp Mount Kit includes an action adapter ensures full compatibility with major action cameras: compatible with DJI OSMO 360, Action 5 Pro 4 3, Pocket 3 2, for Insta 360 ACE Pro, for GoPro Hero 13 12 11 10 sports cameras. A 1/4-inch screw adapter is included for single-clamp use, suitable for a wide range of pipes such as motorcycle handlebars, bumpers, bicycle seat posts, and more.
Where it sits in the range
EMART overhead camera rigs, magic arms, super clamps, suction mounts, ball heads, sandbags and the small metal that holds a photography backdrop stand together.
The job it does
The small metal is what decides whether a photography backdrop stand behaves. Spring clamps at the corners, hooks spread along the bar, sandbags at the feet, the right fitting between two threads — buy the frame without them and you arrive on location unable to hang anything.
What size EMART backdrop stand this suits
Choosing the size is arithmetic rather than taste. Measure the wall across, subtract roughly a foot at each end for the legs and the fittings, and you have the span the frame has to accommodate when it is fully open. Height comes next, and it is the figure that changes once a subject stands: a seated portrait is happy at seven feet, a standing one wants everything expanded so the top edge of a muslin, seamless white, black or green surface stays above the shot. Keep a step of space behind the subject rather than putting them directly against the surface. In a small room, buy a little extra width — that is where an additional panel, a light or a prop ends up living. As a general matter, one size up forgives more than one size down.
Getting it standing
Setup, in order: extend each telescopic section, lock the adjustable collar, then square the base. The mounting fitting is standard, so heads and clamps from other stands assemble onto it without an adaptor, and it all happens quickly with two hands. Stability comes from the base rather than the column: spread the legs fully, position the feet out of the walkway, and it sits stable on a floor that is not quite flat. Anything heavy hanging on the system wants weight at the feet as well.
Hanging it and holding it steady
Hang the surface a little narrower than the crossbar so it has something to pull against. A spring clamp secures each corner, hooks carry the middle, and that clamp will just as happily hold a light modifier or pin a cable to a tripod tube when the kit outgrows the room.
Travel, bag and care
Folded, it is compact enough to transport as one piece: the carry bag in the package takes the whole collapsible set, so no extra sections travel loose. Aluminium alloy keeps the weight sensible; the metal that decides durability sits in the locks and the joints, not the finish. The design is pro in the only sense that matters — practicality over appearance — and the material trade is plain: aluminum travels, steel survives. Wipe the metal down after an outdoor event, keep the small parts together, and store it standing rather than flat under something heavier. Fabric care is one rule: rolled, not folded — a wrinkle photographs.
