EMART 5 in 1 Suction Cup Camera Mount for Gopro/DJI/Insta 360/AKASO Cameras
EMART builds photography backdrop stands, background support and the lights that stand beside them.
Car Camera Mount with Selfie Stick Extension Pole 1/4" Screw, Compatible with Insta360 X6 X5 X4 X3 GoPro DJI OSMO 360 Cameras
4.4
$9999
In Stock
Our 5 in 1 Suction Cup Camera Mount for Gopro/DJI/Insta 360/AKASO Cameras is the piece we hand over when a room has to turn into a set in one go.
It arrives with 360-degree rotation. Everything we list is our own; the price you see is the one on our product listing today.
Key features
- Upgraded 5-Suction-Cup. This camera car mount adds a double suction mount on the basis of the 3-cup version, forming a reinforced 5-point triangular bearing base. It allows individual or combined use on car hoods, dashes, windows, windshields, side panels, handlebars, or for handheld shooting. Note to use at speeds below 80 km/h to prevent accidental drops
- Upgraded Safety. Equipped with a vacuum warning line to verify secure suction, this camera suction mount features powerful suction, ultra-strong grip and quick-release design. The tripod suction cup holds 44lb/20kg vertically, and the dual suction cup supports 33lb/15kg vertically for safer operation
- Adjustable shooting angle. Magic arm equipped with a 360° rotatable ball head and self-timer pole (14.4-44.3”) allows fine adjustment without disassembly. It can capture dynamic POV video footage from versatile angles on the dashboard and more. At max speed of 80km/h, the selfie stick has a max load capacity of 1.1 lbs when retracted (Static load capacity:2.2 lbs)
- Wide Compatibility. All accessories come with standard 1/4" screw and action camera adapter. This universal mount works for mirrorless cameras, phone holders, DJI OSMO Pocket, Insta360 Ace Pro 2, GoPro series and more action cameras & smartphones for content creation. Note a safety cord is required when attaching this suction cup stand to the exterior of your vehicle for filming
Specification
In the box
【Complete All-in-One Kit】This all-in-one kit includes 5 x 3-inch hand pump suction cups, dual suction & triple suction NATO bridges, a magic arm, telescoping rod with suction cup connector, phone clip, GoPro adapter, pipe clamp, hex wrench, 1/4" T-handle screws and a safety rope — everything you need to build your ideal rig right out of the box
Where it sits in the range
EMART overhead camera rigs, magic arms, super clamps, suction mounts, ball heads, sandbags and the small metal that holds a photography backdrop stand together.
What this one is for
The small metal is what decides whether a photography backdrop stand behaves. Spring clamps at the corners, hooks spread along the bar, sandbags at the feet, the right fitting between two threads — buy the frame without them and you arrive on location unable to hang anything.
Matching it to a photography backdrop stand
Choosing the size is arithmetic rather than taste. Measure the wall across, subtract roughly a foot at each end for the legs and the fittings, and you have the span the frame has to accommodate when it is fully open. Height comes next, and it is the figure that changes once a subject stands: a seated portrait is happy at seven feet, a standing one wants everything expanded so the top edge of a muslin, seamless white, black or green surface stays above the shot. Keep a step of space behind the subject rather than putting them directly against the surface. In a small room, buy a little extra width — that is where an additional panel, a light or a prop ends up living. As a general matter, one size up forgives more than one size down.
Putting it up
It opens from folded in one pass, with no tools. Each telescopic section is adjustable along its length, mounting is the standard thread studio fittings use, and setup is quick enough that you assemble it after the subject has arrived rather than an hour before. The legs open wide, and that width is the stability — not the thickness of the tube. Position the base so nobody kicks a foot, and add weight at the feet whenever the load is heavy or people are moving across the room behind the frame.
Hanging it and holding it steady
Hang the surface a little narrower than the crossbar so it has something to pull against. A spring clamp secures each corner, hooks carry the middle, and that clamp will just as happily hold a light modifier or pin a cable to a tripod tube when the kit outgrows the room.
Carrying it and keeping it
The bag in the package is the one it will spend its life in: collapsible frame, small parts, extra clamps. Folded it is portable enough for a train and compact enough for a boot. Aluminium alloy keeps the weight sensible; the metal that decides durability sits in the locks and the joints, not the finish. The design is pro in the only sense that matters — practicality over appearance — and the material trade is plain: aluminum travels, steel survives. Care is minimal: wipe the sections, keep the clamps in the same bag, store it dry. Roll fabric rather than folding it and a wrinkle stops being something you plan around.
