EMART 3"Triple Suction Cup Car Mount with Ball Head Magic Arm for Insta360
EMART builds photography backdrop stands, background support and the lights that stand beside them.
4.4
$4999
In Stock
This is our answer for the setup that has to go up, hold still and come down the same evening.
The build runs to metal, which keeps the weight sensible without giving up on the joints. You also get a heavy-duty build, a quick-release plate and 360-degree rotation. Everything we list is our own; the price you see is the one on our product listing today.
Key features
- Strong Suction & Stable Safety. Equipped with three 3-inch heavy duty suction cups that deliver long-lasting and stable adsorption,this holder features a horizontal suction force of 44 lbs,and its accessory,the magic arm has a load capacity of 4.4 lbs.The triple suction cup is specially designed for multiple scenarios including vehicle filming,driving recording and mobile snapshot shooting.
- Angle Adjustable. The camera suction mount base offers multiple expansion interfaces with a 1/4-inch screw hole, 3/8-inch threaded hole.The triple ballheads structure can adjust the angle according to different usage scenarios and shooting needs.Loosen one screw between the three suction cups,and the two suction cup can rotate 360 degrees for positioning adjustment.
- Quick Release & Easy-use. One-button press design for quick removal and installation.Easily lock by pressing the pressure latch until the warning line disappears.If the warning line reappears during use, press again to reinforce.To release, gently pinch both sides and the latch will spring open.
- Wide Application. This trio suction cup combo set provides greater stability than a single cup.Primarily designed for out-car mobile shooting,it also excels for indoor stationary photography,sports photography,travel video capture, and specialized angle shots.It can be attached to metal/ceramic surfaces,car hood,car top roof,trunck lid,dash cam,motorcycle,boat,window,dashboard,etc.
Specification
| Material | Metal |
|---|
In the box
【Compatible with Mainstream Devices】The vacuum suction cup kit's magic arm has a 1/4" thread mount.Compatible with Go Pro Hero,Action 2/3/4/5,Insta360 x3 go ultra accessories,DJI osmo pocket 3 and lightweight DSLRs.Includes a phone clamp compatible with iPhone,Samsung,and more.
Where it sits in the range
EMART overhead camera rigs, magic arms, super clamps, suction mounts, ball heads, sandbags and the small metal that holds a photography backdrop stand together.
What this one is for
Grip is everything between the camera and whatever it is attached to. Clamps hold backdrop fabric to a crossbar, arms hang a small light off a shelf, plates let a body come off a tripod without unscrewing anything. None of it is interesting and all of it is why a set stays where you left it.
Sizing it against your photography backdrop stand
Size is a room problem before it is a shopping problem. Take the wall you shoot against, measure across it and subtract a foot at each end for the legs — the rest is what the frame can accommodate once it is open. Then decide height, because that is the figure people change their mind about the moment the subject stands up: seven feet suits seated work, full-length needs the sections fully expanded so the top edge of a white, black, green or seamless muslin surface never appears. Leave space between the subject and the surface too; stood directly against it, a face picks up every mark behind it. A small room rewards a little extra span, which is where an additional panel or a prop goes. In general, choosing one size up is the cheaper mistake.
Putting it up
Setup is hands only. The sections are telescopic, so you assemble it by pulling up and locking rather than by counting parts, and the adjustable collars let you stop anywhere between the stops. Mounting uses the standard fitting for this type of gear, so it mates with what is already in your bag, and it goes up quickly enough to do alone. The legs open wide, and that width is the stability — not the thickness of the tube. Position the base so nobody kicks a foot, and add weight at the feet whenever the load is heavy or people are moving across the room behind the frame.
Hanging it and holding it steady
Hang the surface a little narrower than the crossbar so it has something to pull against. A spring clamp secures each corner, hooks carry the middle, and that clamp will just as happily hold a light modifier or pin a cable to a tripod tube when the kit outgrows the room.
Carrying it and keeping it
Transport is the test most of this kit fails. Folded it is compact, the carry bag swallows the collapsible frame and the small extra parts, and the whole package carries on one shoulder. Aluminium alloy keeps the weight sensible; the metal that decides durability sits in the locks and the joints, not the finish. The design is pro in the only sense that matters — practicality over appearance — and the material trade is plain: aluminum travels, steel survives. Keep it dry and the care budget is a cloth. Grit in a joint wears a section faster than rain does; a rolled surface arrives without a wrinkle, a folded one arrives with a map of itself.
