EMART 3"Dual Suction Cup Camera Mount with Ball Head Magic Arm for Insta360
EMART gear: photography backdrop stands, background support, lighting and the small metal.
Car Camera Mount Compatible with DJI Osmo Action 6/5 Pro/4,Insta 360 x4/x5,GoPro,DSLRs,Phone on Car Windshield,Window,Hood
4.4
$3999
In Stock
Our 3"Dual Suction Cup Camera Mount with Ball Head Magic Arm for Insta360 is the piece we hand over when a room has to turn into a set in one go.
The frame is metal, which is the difference between a stand that travels and one that bends. It arrives with a heavy-duty build, a quick-release plate and 360-degree rotation. We keep one listing per size so you are never guessing which box arrives.
Key features
- Strong Suction & Stable Safety. Equipped with two 3-inch heavy duty suction cups that deliver long-lasting and stable adsorption,this holder features a horizontal suction force of 33 lbs,and its accessory,the magic arm has a load capacity of 4.4 lbs.The double suction cup is specially designed for multiple scenarios including vehicle filming,driving recording and mobile snapshot shooting
- Angle Adjustable. The camera suction mount base offers multiple expansion interfaces with a 1/4-inch screw hole, 3/8-inch threaded hole.The double ballheads structure can adjust the angle according to different usage scenarios and shooting needs.Loosen one screw between the two suction cups,and the other suction cup can rotate 360 degrees for positioning adjustment
- Quick Release & Easy-use. One-button press design for quick removal and installation.Easily lock by pressing the pressure latch until the warning line disappears.If the warning line reappears during use, press again to reinforce.To release, gently pinch both sides and the latch will spring open
- Wide Application. This dual suction cup combo set provides greater stability than a single cup.Primarily designed for in-car mobile shooting,it also excels for indoor stationary photography,sports photography,travel video capture, and specialized angle shots.It can be attached to metal/ceramic surfaces,car hood,car top roof,trunck lid,dash cam,motorcycle,boat,window,dashboard,etc.
Specification
| Material | Metal |
|---|
In the box
【Compatible with Mainstream Devices】The vacuum suction cup kit's magic arm has a 1/4" thread mount.Compatible with Go Pro Hero,Action 2/3/4/5,Insta360 x3 go ultra accessories,DJI osmo pocket 3 and lightweight DSLRs.Includes a phone clamp compatible with iPhone,Samsung,and more
Where it sits in the range
EMART overhead camera rigs, magic arms, super clamps, suction mounts, ball heads, sandbags and the small metal that holds a photography backdrop stand together.
Where it earns its place
Grip is everything between the camera and whatever it is attached to. Clamps hold backdrop fabric to a crossbar, arms hang a small light off a shelf, plates let a body come off a tripod without unscrewing anything. None of it is interesting and all of it is why a set stays where you left it.
Sizing it against your photography backdrop stand
Work out the size from the room rather than from the catalogue. Measure the wall you shoot against, take a foot off each end for the legs, and what is left is the span a frame opens to and can honestly accommodate. Height is the figure people change their mind about later: seven feet suits a seated subject, while a standing full-length shot wants the frame fully expanded so the top edge of a seamless white, muslin, black or green surface stays out of shot. Space behind the subject matters as much as space across it — stood directly against the surface, anybody picks up its texture. In a small room, give yourself a little extra at the back so an additional panel or a prop can go in without everything having to move. As a general rule, choosing one size up costs less than choosing one size down.
Setting it up
Setup is hands only. The sections are telescopic, so you assemble it by pulling up and locking rather than by counting parts, and the adjustable collars let you stop anywhere between the stops. Mounting uses the standard fitting for this type of gear, so it mates with what is already in your bag, and it goes up quickly enough to do alone. Stability comes from the base rather than the column: spread the legs fully, position the feet out of the walkway, and it sits stable on a floor that is not quite flat. Anything heavy hanging on the system wants weight at the feet as well.
Clamping, hooks and the crossbar
The crossbar carries the hang, the hooks spread it and a spring clamp secures the corners. Keep two spare clamps in the kit: one ends up on a light, one on a tripod tube, and neither is worth needing and not having.
Bag, case and care
Folded, it is compact enough to transport as one piece: the carry bag in the package takes the whole collapsible set, so no extra sections travel loose. Durability lives in the fittings. Aluminum alloy gives an enhanced strength for the weight, the material of the locking collars decides the rest, and the practicality of a professional design beats a powerful specification nobody uses. Quality here means the metal has not moved in a year. Care is minimal: wipe the sections, keep the clamps in the same bag, store it dry. Roll fabric rather than folding it and a wrinkle stops being something you plan around.
