EMART 10x8.5ft Heavy Duty Backdrop Stand Adjustable Pipe and Drape Kit
From the EMART range of photography backdrop stands, lighting kits and the grip between them.
Sturdy Metal Diy Photo Background Frame with 9.26 LBS Steel Flat Base for Parties, Events, Wedding, Photography - Black
4.1 511 reviews
$14999
In Stock
Other options on this listing
We keep our 10x8.5ft Heavy Duty Backdrop Stand Adjustable Pipe and Drape Kit in the range because most shoots need one dependable frame, not five clever ones.
We build it in aluminium and metal because gear that lives in a car boot gets handled badly. It arrives with a heavy-duty build, telescopic sections and a folding frame. We would rather you bought the smaller frame and used it than the big one that stays in the bag.
Key features
- SUPPORTS UP TO 33 LBS: EMART heavy duty backdrop stand supports up to 33 pounds, with thickened pipes and an expanded base for enhanced stability. Made from aluminum and steel, it offers rust resistance and high structural strength, ensuring both durability and sturdiness
- STABLE AND COMPACT BASE: Featuring flat metal bases, each weighing 9.26 lbs, our pipe and drape stand offers stable support with a large contact area. The foldable, space-saving design prevents tripping, and ensures easy assembly and storage
- EASY SIZE ADJUSTMENTS:Our 8.5x10 adjustable backdrop stand offers a telescopic design for flexible sizing. Easily adjust frame width from 5.7 to 10 ft and height from 3.8 to 8.5 ft. Stepless tube adjustments ensure the perfect fit for any event
- QUICK SETUP IN MINUTES: Pipe and drape kit is easy to install and can be assembled quickly within minutes. No tools are needed to assemble the background stand. For step-by-step instructions, please refer to the installation schematic on our webpage or contact us for assistance
- READY FOR ANY OCCASION: This pipe and drape backdrop stand is ideal for weddings, parties, and photo shoots. Easily hang curtains, balloons, lights, and more decoration to create stunning backdrops, perfect for both indoor and outdoor events
Specification
| Material | Aluminium and metal |
|---|---|
| Reviews on the listing | 511 |
Where it sits in the range
Every EMART set starts with the same question: what is holding the background up? These are our photography backdrop stands — single crossbar, double, triple, T-shape and full pipe and drape — sized by the width of background they carry.
Where it earns its place
A photography backdrop stand earns its keep by being boring. The frame goes up, the background hangs straight and nothing else in the room has to move. The same support stand serves portraits, seated interviews, pet photography and a photo booth at a wedding, because the job does not change: a clean surface behind the subject that stays where you put it.
What size EMART backdrop stand this suits
Choosing the size is arithmetic rather than taste. Measure the wall across, subtract roughly a foot at each end for the legs and the fittings, and you have the span the frame has to accommodate when it is fully open. Height comes next, and it is the figure that changes once a subject stands: a seated portrait is happy at seven feet, a standing one wants everything expanded so the top edge of a muslin, seamless white, black or green surface stays above the shot. Keep a step of space behind the subject rather than putting them directly against the surface. In a small room, buy a little extra width — that is where an additional panel, a light or a prop ends up living. As a general matter, one size up forgives more than one size down.
Setting it up
Setup is hands only. The sections are telescopic, so you assemble it by pulling up and locking rather than by counting parts, and the adjustable collars let you stop anywhere between the stops. Mounting uses the standard fitting for this type of gear, so it mates with what is already in your bag, and it goes up quickly enough to do alone. The legs open wide, and that width is the stability — not the thickness of the tube. Position the base so nobody kicks a foot, and add weight at the feet whenever the load is heavy or people are moving across the room behind the frame.
Hanging it and holding it steady
Hang the surface a little narrower than the crossbar so it has something to pull against. A spring clamp secures each corner, hooks carry the middle, and that clamp will just as happily hold a light modifier or pin a cable to a tripod tube when the kit outgrows the room.
Bag, case and care
The bag in the package is the one it will spend its life in: collapsible frame, small parts, extra clamps. Folded it is portable enough for a train and compact enough for a boot. Material and durability are the same question here. Aluminum alloy is the light choice and steel the enhanced one, and the quality of a design shows in whether a section still locks after a year. Professional gear is rarely powerful; it is excellent at being predictable, which is practicality rather than polish. Wipe the metal down after an outdoor event, keep the small parts together, and store it standing rather than flat under something heavier. Fabric care is one rule: rolled, not folded — a wrinkle photographs.
