EMART Photo Backdrop Stand, 8.5x10ft Back Drop Stand for Party, Photography
EMART builds photography backdrop stands, background support and the lights that stand beside them.
Banner Holder with 6Clamps&Clips, 2Sandbags,Square Backdrop Stand for Wedding, Baby Shower, Events Dectoration, Exhibition
4.6 16,883 reviews
$4999
In Stock
Our Photo Backdrop Stand, 8.5x10ft Back Drop Stand for Party, Photography is the piece we hand over when a room has to turn into a set in one go.
The build runs to metal and tulle, which keeps the weight sensible without giving up on the joints. You also get a portable format. We keep one listing per size so you are never guessing which box arrives.
Key features
- Adjustable backdrop stand. The size of the backdrop stand is 10x8.5ft, and the height and width can be adjusted freely. Easy to adjust and lock through the knob, no need for help, can be easily done by yourself.
- Strong background fixture. Spring clamps and clips are the perfect partner of the backdrop stand, they can install the background cloth, balloons, tulle, seamless paper, curtains, light strings and other decorations on the crossbar without moving easily.
- Use more sturdy&stable. Stronger base with our included sandbag bag, give you double solid support, will not easily tip, suitable for indoor and outdoor diverse environment. environments.
- Super portable. This backdrop stand made of premium quality metal and is lightweight & portable. And it is equipped with a portable bag, which can put all products into it. It can be stored in the corner, in the cupboard, under the bed or in the trunk of the car
Specification
| Material | Metal and tulle |
|---|---|
| Reviews on the listing | 16,883 |
In the box
【Super simple setup】The upgraded backdrop stand has a simple installation method, which is perfect for indoor and outdoor activities. The contents of the product include: clamps x 6, clips x 4, sandbags x 2, light stands x 2, crossbars x 4 & portable bag x 1.
Where it sits in the range
Every EMART set starts with the same question: what is holding the background up? These are our photography backdrop stands — single crossbar, double, triple, T-shape and full pipe and drape — sized by the width of background they carry.
What this one is for
This is a support system first and a photography accessory second. Hang a muslin, a white sweep, a black drape or a green chroma panel across the crossbar and the frame does not care which. What it cares about is the span, the working height and the weight at the legs — the three figures that decide whether a background stand is the right size for your room.
Matching it to a photography backdrop stand
Choosing the size is arithmetic rather than taste. Measure the wall across, subtract roughly a foot at each end for the legs and the fittings, and you have the span the frame has to accommodate when it is fully open. Height comes next, and it is the figure that changes once a subject stands: a seated portrait is happy at seven feet, a standing one wants everything expanded so the top edge of a muslin, seamless white, black or green surface stays above the shot. Keep a step of space behind the subject rather than putting them directly against the surface. In a small room, buy a little extra width — that is where an additional panel, a light or a prop ends up living. As a general matter, one size up forgives more than one size down.
Putting it up
Setup, in order: extend each telescopic section, lock the adjustable collar, then square the base. The mounting fitting is standard, so heads and clamps from other stands assemble onto it without an adaptor, and it all happens quickly with two hands. A wide base is what keeps the support system stable when somebody walks behind the subject. Position two legs under the load, keep the third foot clear of the walkway, and hang anything heavy low rather than at full height.
Clamps, hooks and the top edge
The crossbar carries the hang, the hooks spread it and a spring clamp secures the corners. Keep two spare clamps in the kit: one ends up on a light, one on a tripod tube, and neither is worth needing and not having.
Carrying it and keeping it
Transport is the test most of this kit fails. Folded it is compact, the carry bag swallows the collapsible frame and the small extra parts, and the whole package carries on one shoulder. Durability lives in the fittings. Aluminum alloy gives an enhanced strength for the weight, the material of the locking collars decides the rest, and the practicality of a professional design beats a powerful specification nobody uses. Quality here means the metal has not moved in a year. Care takes a minute: sections wiped, clamps back in the bag, the whole thing kept upright in a corner. A wrinkle in a surface is a storage problem rather than a fabric problem.
