EMART Backdrop Stand Heavy Duty 12ftx30ft, Adjustable Pipe and Drape Photo Background Support Kit, Metal Frame with Flat Base for Wedding Birthday Party Banquet Decorations-Gold
EMART builds photography backdrop stands, background support and the lights that stand beside them.
5.0 4 reviews
$47999
Currently unavailable
If the room is borrowed and the call time is tight, this is the kit we would carry in.
The build runs to aluminium and metal, which keeps the weight sensible without giving up on the joints. You also get a heavy-duty build. If a size is missing from this page, it is because we do not make it, not because it sold out.
Key features
- Adjustable Backdrop Stand. The Pipe and drape backdrop stand can be freely assembled into different sizes according on your needs
- Sturdy Photo Background Stand. 12x30 ft /3.6x9 m heavy duty backdrop stand. Aluminum and steel framework provides maximum stability and professional durability,Sturdy base legs provide sturdy balanced support for safety and reliability
- Sturdy Photo Background Stand. 12x30 ft /3.6x9 m heavy duty backdrop stand. Aluminum and steel framework provides maximum stability and professional durability,Sturdy base legs provide sturdy balanced support for safety and reliability
- Wide Application. This decoration backdrop stand is perfectly suitable for weddings, parties, birthday, baby shower, photography, photo booths, banner stand backgrounds, business events and so on. You can hang drapes, balloons, string lights and flowers to make your backdrop stand amazing
Specification
| Material | Aluminium and metal |
|---|---|
| Reviews on the listing | 4 |
In the box
【Package includes】Heavy duty backdrop stand includes 3 crossbars, 4 vertical poles, 4 heavy duty bases,4 sleeves, 4 screws, and 1 Allen key
Where it sits in the range
Every EMART set starts with the same question: what is holding the background up? These are our photography backdrop stands — single crossbar, double, triple, T-shape and full pipe and drape — sized by the width of background they carry.
The job it does
This is a support system first and a photography accessory second. Hang a muslin, a white sweep, a black drape or a green chroma panel across the crossbar and the frame does not care which. What it cares about is the span, the working height and the weight at the legs — the three figures that decide whether a background stand is the right size for your room.
Sizing it against your photography backdrop stand
Choosing the size is arithmetic rather than taste. Measure the wall across, subtract roughly a foot at each end for the legs and the fittings, and you have the span the frame has to accommodate when it is fully open. Height comes next, and it is the figure that changes once a subject stands: a seated portrait is happy at seven feet, a standing one wants everything expanded so the top edge of a muslin, seamless white, black or green surface stays above the shot. Keep a step of space behind the subject rather than putting them directly against the surface. In a small room, buy a little extra width — that is where an additional panel, a light or a prop ends up living. As a general matter, one size up forgives more than one size down.
Getting it standing
Assembly is quick and standard. Pull each telescopic section up by hand, lock the adjustable collar, square the base. The mounting threads are the usual size for this kind of gear, so a fitting borrowed from another stand will do, and the whole setup takes one pair of hands. A wide base is what keeps the support system stable when somebody walks behind the subject. Position two legs under the load, keep the third foot clear of the walkway, and hang anything heavy low rather than at full height.
Clamps, hooks and the top edge
A spring clamp at each corner secures the top edge and hooks spread the load along the crossbar, so the surface hangs straight instead of scalloping between two points. The same clamp keeps a light cable or a tripod leg out of frame when the kit gets crowded, without needing a second pair of hands.
Travel, bag and care
The bag in the package is the one it will spend its life in: collapsible frame, small parts, extra clamps. Folded it is portable enough for a train and compact enough for a boot. Material and durability are the same question here. Aluminum alloy is the light choice and steel the enhanced one, and the quality of a design shows in whether a section still locks after a year. Professional gear is rarely powerful; it is excellent at being predictable, which is practicality rather than polish. Care takes a minute: sections wiped, clamps back in the bag, the whole thing kept upright in a corner. A wrinkle in a surface is a storage problem rather than a fabric problem.
