EMART Backdrop Stand Heavy Duty 10x10Ft Adjustable Pipe and Drape Kit-Black
From the EMART range of photography backdrop stands, lighting kits and the grip between them.
Photo Background Photography Kit, Adjustable Metal Frame with Flat Base for Wedding Birthday Party Decoration
4.0 24 reviews
$18999
In Stock
We keep our Backdrop Stand Heavy Duty 10x10Ft Adjustable Pipe and Drape Kit-Black in the range because most shoots need one dependable frame, not five clever ones.
We build it in aluminium alloy and metal because gear that lives in a car boot gets handled badly. You also get a heavy-duty build, a folding frame, a portable format and a carry bag. We would rather you bought the smaller frame and used it than the big one that stays in the bag.
Key features
- Heavy Duty Backdrop Stand. This background stand backdrop is made of high-quality aluminum alloy, featuring rust resistance and high strength. Its vertical and horizontal poles in the pipe and drape stand system are thickened, further enhancing its load-bearing capacity
- Stable & Space-Saving. Each heavy duty metal base weighs 10.3 lbs and features a flat foldable design. When unfolded, it evenly distributes weight to prevent shaking and tipping. Meanwhile, its space-saving design makes assembly and storage easy
- Adjustable Backdrop Stand. Featuring a crossbar with rotary lock and uprights with trigger buckles for quick and secure locking, the back drop adjustable stand can be easily adapted to different heights and widths as required (height: 3.8–10 ft, width: 4–10 ft)
- Wide Application. The stand for backdrop is great for wedding, birthday, parties, photography, exhibition, trade show and other indoor or outdoor occasions. Equipped with 6 backdrop clamps, this backdrop stand for parties lets you hang curtains, drapes, balloons, string lights, and flower walls to create an amazing atmosphere
Specification
| Material | Aluminium alloy and metal |
|---|---|
| Reviews on the listing | 24 |
In the box
【Convenient Installation】The pipe and drape kit can be quickly assembled in a few minutes, and you can refer to the installation instructions for any questions during setup. It also comes with a carrying bag to make the backdrop stand portable
Where it sits in the range
Every EMART set starts with the same question: what is holding the background up? These are our photography backdrop stands — single crossbar, double, triple, T-shape and full pipe and drape — sized by the width of background they carry.
What this one is for
A photography backdrop stand earns its keep by being boring. The frame goes up, the background hangs straight and nothing else in the room has to move. The same support stand serves portraits, seated interviews, pet photography and a photo booth at a wedding, because the job does not change: a clean surface behind the subject that stays where you put it.
What size EMART backdrop stand this suits
Choosing the size is arithmetic rather than taste. Measure the wall across, subtract roughly a foot at each end for the legs and the fittings, and you have the span the frame has to accommodate when it is fully open. Height comes next, and it is the figure that changes once a subject stands: a seated portrait is happy at seven feet, a standing one wants everything expanded so the top edge of a muslin, seamless white, black or green surface stays above the shot. Keep a step of space behind the subject rather than putting them directly against the surface. In a small room, buy a little extra width — that is where an additional panel, a light or a prop ends up living. As a general matter, one size up forgives more than one size down.
Putting it up
Setup, in order: extend each telescopic section, lock the adjustable collar, then square the base. The mounting fitting is standard, so heads and clamps from other stands assemble onto it without an adaptor, and it all happens quickly with two hands. Stability is a question of footprint. Open the legs to their stops, press the feet down, and position the base so the heaviest part of the load sits over it — weight in the right place does more for a support system than weight in total.
Hanging it and holding it steady
A spring clamp at each corner secures the top edge and hooks spread the load along the crossbar, so the surface hangs straight instead of scalloping between two points. The same clamp keeps a light cable or a tripod leg out of frame when the kit gets crowded, without needing a second pair of hands.
Carrying it and keeping it
Transport is the test most of this kit fails. Folded it is compact, the carry bag swallows the collapsible frame and the small extra parts, and the whole package carries on one shoulder. Durability lives in the fittings. Aluminum alloy gives an enhanced strength for the weight, the material of the locking collars decides the rest, and the practicality of a professional design beats a powerful specification nobody uses. Quality here means the metal has not moved in a year. Care takes a minute: sections wiped, clamps back in the bag, the whole thing kept upright in a corner. A wrinkle in a surface is a storage problem rather than a fabric problem.
