EMART 7.2/6.6/6Ft White Arch Backdrop Stand Set 3 for Wedding Party Balloon
EMART builds photography backdrop stands, background support and the lights that stand beside them.
Wedding Arch with 12 Ground Nails&6 Water Bags, Arched Backdrop Stand for Birthday, Baby Shower, Graduation, Festival Decor
4.6 59 reviews
$5999
In Stock
Our 7.2/6.6/6Ft White Arch Backdrop Stand Set 3 for Wedding Party Balloon is the piece we hand over when a room has to turn into a set in one go.
The build runs to metal, which keeps the weight sensible without giving up on the joints. The build includes a carry bag. We would rather you bought the smaller frame and used it than the big one that stays in the bag.
Key features
- Sturdy & Aesthetic Connections. The wedding arch stand uses precision spiral-threaded connectors at every central load point—no exposed screws.The gold arch backdrop features ground nails and water bags, standing firm against wind, floral weight, or a bustling party crowd. Whether you're styling a floral arch or a round balloon arch stand, the support is undeniable.
- High-Quality Arch Backdrop Stand. This metal arch backdrop stand features a 19mm diameter and 0.7mm wall thickness for exceptional durability. The arch backdrop stand resists rust and fading. Our arch stand uses premium round tubing paired with a square base, delivering both graceful curves and rock-solid stability—making it a reliable metal arch stand for indoor and outdoor use.
- Assemble in 10 Minutes. The full balloon arch kit can be set up in just 10 minutes. Every straight tube rod is the same length with spiral-threaded joints—just twist and repeat. The bottom bar has a red tape marker, so you always know which piece goes where.The backdrop arch stand tubes for each size are boxed separately. Storing each size separately will make reassembly even easier next time.
- Versatile & Reusable. Balloon arch stand is perfect for wedding, baby shower, birthday party, graduation, anniversary, garden, photography, photo booths, commercial events, New year, Halloween, Thanks Giving Day, Christmas, Valentine's Day, indoor or outdoor decorations
Specification
| Material | Metal |
|---|---|
| Reviews on the listing | 59 |
In the box
【3-Piece Wedding Arch Stand Set】3-Pieces wedding arch frame perfectly matched with three sizes, for meeting your different needs. The three sizes measures 7.2x4FT (HxW), 6.6x3.3FT (HxW) and 6x2.6FT (HxW). Package contains over 12 ground nails, 12 dust-proof defense, 6 water bags and 3 carry bags, 3 instruction manuals
Where it sits in the range
EMART wedding arch frames and stretch covers, welcome sign easels, round tablecloths, balloon sets and the backdrop stands that carry them.
What this one is for
An event backdrop is part of the decoration rather than a surface meant to disappear, and everybody in the room photographs it on a phone. That means a wider frame, fabric that reads well in a snapshot and a base solid enough to stand in a corridor of moving people.
What size EMART backdrop stand this suits
Size is a room problem before it is a shopping problem. Take the wall you shoot against, measure across it and subtract a foot at each end for the legs — the rest is what the frame can accommodate once it is open. Then decide height, because that is the figure people change their mind about the moment the subject stands up: seven feet suits seated work, full-length needs the sections fully expanded so the top edge of a white, black, green or seamless muslin surface never appears. Leave space between the subject and the surface too; stood directly against it, a face picks up every mark behind it. A small room rewards a little extra span, which is where an additional panel or a prop goes. In general, choosing one size up is the cheaper mistake.
Putting it up
Setup, in order: extend each telescopic section, lock the adjustable collar, then square the base. The mounting fitting is standard, so heads and clamps from other stands assemble onto it without an adaptor, and it all happens quickly with two hands. A wide base is what keeps the support system stable when somebody walks behind the subject. Position two legs under the load, keep the third foot clear of the walkway, and hang anything heavy low rather than at full height.
Hanging it and holding it steady
A spring clamp at each corner secures the top edge and hooks spread the load along the crossbar, so the surface hangs straight instead of scalloping between two points. The same clamp keeps a light cable or a tripod leg out of frame when the kit gets crowded, without needing a second pair of hands.
Carrying it and keeping it
It packs into the carry bag it arrives in — a portable, collapsible package small enough to live in a car boot between shoots, which is the only way gear gets used weekly. Aluminium alloy keeps the weight sensible; the metal that decides durability sits in the locks and the joints, not the finish. The design is pro in the only sense that matters — practicality over appearance — and the material trade is plain: aluminum travels, steel survives. Keep it dry and the care budget is a cloth. Grit in a joint wears a section faster than rain does; a rolled surface arrives without a wrinkle, a folded one arrives with a map of itself.
