EMART 7.2/6.6/6Ft Metal Arch Backdrop Stand Set 3 for Wedding Party Balloon
EMART gear: photography backdrop stands, background support, lighting and the small metal.
Wedding Arch with 12 Ground Nails & 6 Water Bags, Arched Backdrop Stand for Birthday, Baby Shower, Graduation, Festival Decor
4.6 59 reviews
$5999
In Stock
This is our answer for the setup that has to go up, hold still and come down the same evening.
The frame is metal, which is the difference between a stand that travels and one that bends. It arrives with a carry bag. Specifications here are read straight off our own listing — no rounding, no best case.
Key features
- Sturdy & Aesthetic Connections. This wedding arch stand use spiral-threaded connect at every interface—no exposed screws. The deep gold finish with a subtle sparkle looks far more elegant than cheap bright gold. The gold arch backdrop features ground nails and water bags, standing firm against wind, floral weight or a bustling party crowd.
- High-Quality Arch Backdrop Stand. This metal arch backdrop stand features a 19mm diameter and 0.7mm wall thickness for exceptional durability.The arch backdrop stand resists rust and fading. Our arch stand use premium round and square base designs ensure rock-solid stability indoors and out. Whether for a balloon arch, floral arch or fabric backdrops, this 3 piece arch backdrop stand set offers reliable support.
- Assemble in 10 Minutes. The full balloon arch kit can be set up in just 10 minutes. All tubes feature spiral-threaded joints—just twist and repeat. The bottom bar has a red tape marker, so you always know which piece goes where.Storing each size backdrop arch stand tubes separately will make reassembly even easier next time and can also be carried and stored easily between different events.
- Versatile & Reusable. Balloon arch stand is perfect for wedding, baby shower, birthday parties, graduation, anniversary, garden, photography, photo booths, commercial events, New year, Halloween, Thanks Giving Day, Christmas, Valentine's Day, indoor or outdoor decorations
Specification
| Material | Metal |
|---|---|
| Reviews on the listing | 59 |
In the box
【3-Piece Wedding Arch Stand Set】3-Pieces wedding arch frame perfectly matched with three sizes, for meeting your different needs. The three sizes measures 7.2x4FT (HxW), 6.6x3.3FT (HxW) and 6x2.6FT (HxW). Package contains over 12 ground nails, 12 dust-proof defense, 6 water bags and 3 carry bags, 3 instruction manuals
Where it sits in the range
EMART wedding arch frames and stretch covers, welcome sign easels, round tablecloths, balloon sets and the backdrop stands that carry them.
The job it does
The same frames that carry a studio background carry an arch at a reception, so this sits next to the stands rather than off on its own. Weddings, birthdays and a photo booth in the corner all want the same thing: a backdrop stand one person can carry from a car to a hall.
Sizing it against your photography backdrop stand
Size is a room problem before it is a shopping problem. Take the wall you shoot against, measure across it and subtract a foot at each end for the legs — the rest is what the frame can accommodate once it is open. Then decide height, because that is the figure people change their mind about the moment the subject stands up: seven feet suits seated work, full-length needs the sections fully expanded so the top edge of a white, black, green or seamless muslin surface never appears. Leave space between the subject and the surface too; stood directly against it, a face picks up every mark behind it. A small room rewards a little extra span, which is where an additional panel or a prop goes. In general, choosing one size up is the cheaper mistake.
Getting it standing
Setup, in order: extend each telescopic section, lock the adjustable collar, then square the base. The mounting fitting is standard, so heads and clamps from other stands assemble onto it without an adaptor, and it all happens quickly with two hands. Stability is a question of footprint. Open the legs to their stops, press the feet down, and position the base so the heaviest part of the load sits over it — weight in the right place does more for a support system than weight in total.
Hanging it and holding it steady
A spring clamp at each corner secures the top edge and hooks spread the load along the crossbar, so the surface hangs straight instead of scalloping between two points. The same clamp keeps a light cable or a tripod leg out of frame when the kit gets crowded, without needing a second pair of hands.
Travel, bag and care
It packs into the carry bag it arrives in — a portable, collapsible package small enough to live in a car boot between shoots, which is the only way gear gets used weekly. The quality worth paying for is boring: metal collars that still grip, a design with no part that only works while new. Aluminum keeps a pro kit portable, heavier metal makes it durable, and durability on gear like this is an argument about joints. We would rather sound dull than claim an excellent finish. Care is minimal: wipe the sections, keep the clamps in the same bag, store it dry. Roll fabric rather than folding it and a wrinkle stops being something you plan around.
What buyers said
Left on our own listing by verified buyers in the United States, reproduced word for word.
- Dana GuruleSeptember 7, 20265.0
Actually looks like picture
They are like the picture! I haven’t put anything on them yet but putting them together was easy. They also come with a bag to put them in individually. So far so good
- Ingrid BuglioliAugust 11, 20265.0
Very easy to assemble
Perfect, easy to assemble and easy to disassembled, it is gorgeous for decoration
- Stacey sartinAugust 22, 20264.0
Confusing
I am not a favorite of all the many parts and pieces to put together Although it comes in different boxes how do u know which parts to put back in same size box so that was confusing.
