Emart 10x10ft Pipe and Drape Backdrop Stand Kit, Water Tank Base, Black
One of the photography backdrop stands, lighting kits and support systems EMART makes.
Heavy duty adjustable metal frame with water tank bases, ideal for weddings, birthdays, baby showers and holiday party decor
3.9 41 reviews
$14999
In Stock
We keep our 10x10ft Pipe and Drape Backdrop Stand Kit, Water Tank Base, Black in the range because most shoots need one dependable frame, not five clever ones. The columns go up to 10ft, so the top edge sits above the subject rather than in the frame.
We build it in aluminium alloy and metal because gear that lives in a car boot gets handled badly. The build includes a heavy-duty build, telescopic sections and a portable format. If a size is missing from this page, it is because we do not make it, not because it sold out.
Key features
- Sturdy and Stable. The thickened pipes and stable water tank base provide greater load-bearing capacity and stability.The pipe and drape background stand kit is made of good quality aluminum alloy featuring rust resistant, high strength and good gloss, which makes sure it's durable and sturdy enough
- Innovative Water Tank Base Design. The base of this pipe and drape stand kit consists of two water tanks.When filled with water or sand, the base has a low center of gravity, which gives the backdrop stand stronger stability.When you finish using it, you can empty the water or sand from the tanks.The empty tanks weigh only 2.3 pounds, making them easy to carry
- Adjustable Height & Width. With adjustable height (4ft-10ft / 47in-122in) and width (4ft-10ft / 47in-122in).The 10x10ft backdrop frame is made of telescopic rod, the upgraded rotary locking design makes it easy and quick to adjust to any desired size, which meet your mutiple need and create a wonderful background
- Easy Assembly &Portable. The background poles can be easy to assemble in 5 minutes by only 1 person without addtional tools. All accessories fit in one bag for easy carry & storage
- Wide Application. This backdrop stand kit is suitable for baby shower, photography, exhibition, halloween, banquet, ceremony and event decor.You can hang curtain, flower wall, balloon, banner and string lights on it to make your back drop more decorative
Specification
| Height | 10ft |
|---|---|
| Material | Aluminium alloy and metal |
| Reviews on the listing | 41 |
Where it sits in the range
Every EMART set starts with the same question: what is holding the background up? These are our photography backdrop stands — single crossbar, double, triple, T-shape and full pipe and drape — sized by the width of background they carry.
The job it does
This is a support system first and a photography accessory second. Hang a muslin, a white sweep, a black drape or a green chroma panel across the crossbar and the frame does not care which. What it cares about is the span, the working height and the weight at the legs — the three figures that decide whether a background stand is the right size for your room.
What size EMART backdrop stand this suits
Work out the size from the room rather than from the catalogue. Measure the wall you shoot against, take a foot off each end for the legs, and what is left is the span a frame opens to and can honestly accommodate. Height is the figure people change their mind about later: seven feet suits a seated subject, while a standing full-length shot wants the frame fully expanded so the top edge of a seamless white, muslin, black or green surface stays out of shot. Space behind the subject matters as much as space across it — stood directly against the surface, anybody picks up its texture. In a small room, give yourself a little extra at the back so an additional panel or a prop can go in without everything having to move. As a general rule, choosing one size up costs less than choosing one size down.
Getting it standing
Setup is hands only. The sections are telescopic, so you assemble it by pulling up and locking rather than by counting parts, and the adjustable collars let you stop anywhere between the stops. Mounting uses the standard fitting for this type of gear, so it mates with what is already in your bag, and it goes up quickly enough to do alone. Stability is a question of footprint. Open the legs to their stops, press the feet down, and position the base so the heaviest part of the load sits over it — weight in the right place does more for a support system than weight in total.
Clamping, hooks and the crossbar
Clamp the corners first and even out the middle afterwards — the top edge is the part that shows. Hooks along the crossbar keep the hang even, a spring clamp secures anything that moves, and one spare clamp per kit saves needing an improvised fix on a tripod or a light tube.
Travel, bag and care
The bag in the package is the one it will spend its life in: collapsible frame, small parts, extra clamps. Folded it is portable enough for a train and compact enough for a boot. Material and durability are the same question here. Aluminum alloy is the light choice and steel the enhanced one, and the quality of a design shows in whether a section still locks after a year. Professional gear is rarely powerful; it is excellent at being predictable, which is practicality rather than polish. Keep it dry and the care budget is a cloth. Grit in a joint wears a section faster than rain does; a rolled surface arrives without a wrinkle, a folded one arrives with a map of itself.
