EMART 10x10ft Heavy Duty Backdrop Stand Frame with Adjustable Pipe,Gold
EMART builds photography backdrop stands, background support and the lights that stand beside them.
Adjustable Pipe and Drape Stand,Photo Booth Frame for Wedding,Party,Birthday and Festival Decorations
4.2 555 reviews
$19999
In Stock
This is our answer for the setup that has to go up, hold still and come down the same evening.
The build runs to aluminium alloy and metal, which keeps the weight sensible without giving up on the joints. The build includes a heavy-duty build, a portable format and a carry bag. We keep one listing per size so you are never guessing which box arrives.
Key features
- Sturdy Backdrop Stand. EMART 10x10 ft/3x3 m Metal Backdrop Stand with Flat Base, constructed from thick, high-quality weather-resistant aluminum alloy and steel poles, with a maximum load capacity of 15kg/33lb. Stable base legs provide balanced support. Note: Due to gravity, the crossbar may experience slight sagging
- Easy Assembly. The background poles can be easy to assemble in 5 minutes by only 1 person without addtional tools.You can adjust height or width minimum 4.8 x 4ft to maximum 10 x 10ft .Please refer to the instruction or installation video to easy to set up
- Portable and Compact. This stand kit is designed for easy transport and storage, fitting neatly into the included carry bag without taking up much space. Its compact design allows convenient storage in bedrooms, living rooms, or any tight corner
- Wide Application. This backdrop stand kit is suitable for baby shower,photography,exhibition,halloween,banquet , ceremony and event decor.You can hang curtain,,flower wall , balloon ,banner and string lights on it to make your back drop more decorative
Specification
| Material | Aluminium alloy and metal |
|---|---|
| Reviews on the listing | 555 |
In the box
【 Package Includes 】 Heavy duty backdrop stand contains 2 adjustable upright, 2 heavy duty base, 2pcs pins&screws,1 customizable crossbar and 1 carrying bag (Flowers/Drape not included)
Where it sits in the range
Every EMART set starts with the same question: what is holding the background up? These are our photography backdrop stands — single crossbar, double, triple, T-shape and full pipe and drape — sized by the width of background they carry.
The job it does
This is a support system first and a photography accessory second. Hang a muslin, a white sweep, a black drape or a green chroma panel across the crossbar and the frame does not care which. What it cares about is the span, the working height and the weight at the legs — the three figures that decide whether a background stand is the right size for your room.
Matching it to a photography backdrop stand
Size is a room problem before it is a shopping problem. Take the wall you shoot against, measure across it and subtract a foot at each end for the legs — the rest is what the frame can accommodate once it is open. Then decide height, because that is the figure people change their mind about the moment the subject stands up: seven feet suits seated work, full-length needs the sections fully expanded so the top edge of a white, black, green or seamless muslin surface never appears. Leave space between the subject and the surface too; stood directly against it, a face picks up every mark behind it. A small room rewards a little extra span, which is where an additional panel or a prop goes. In general, choosing one size up is the cheaper mistake.
Getting it standing
Setup, in order: extend each telescopic section, lock the adjustable collar, then square the base. The mounting fitting is standard, so heads and clamps from other stands assemble onto it without an adaptor, and it all happens quickly with two hands. Stability is a question of footprint. Open the legs to their stops, press the feet down, and position the base so the heaviest part of the load sits over it — weight in the right place does more for a support system than weight in total.
Hanging it and holding it steady
The crossbar carries the hang, the hooks spread it and a spring clamp secures the corners. Keep two spare clamps in the kit: one ends up on a light, one on a tripod tube, and neither is worth needing and not having.
Travel, bag and care
The bag in the package is the one it will spend its life in: collapsible frame, small parts, extra clamps. Folded it is portable enough for a train and compact enough for a boot. Durability lives in the fittings. Aluminum alloy gives an enhanced strength for the weight, the material of the locking collars decides the rest, and the practicality of a professional design beats a powerful specification nobody uses. Quality here means the metal has not moved in a year. Wipe the metal down after an outdoor event, keep the small parts together, and store it standing rather than flat under something heavier. Fabric care is one rule: rolled, not folded — a wrinkle photographs.
